Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us

Everything To Know About Orthogonal Type Corrugation Machine

Posted by Admin on July, 28, 2021

As we know corrugation machine is an important or an essential type of machine which is used nowadays. A corrugator is a special type of machine which is a set of machines that are arranged together to bring together three, five, or even seven sheets of paper to form a single, double wallboard in the process.

The oblique-type corrugation machine is extensively used to manufacture a wide range of boxes. This type of specialized machine is composed of a motorized reel stand that can lift to a 2ton reel at the same time. This type of machine is widely used for transforming paper into 2ply corrugated rolls.

The working basis of this type of oblique type corrugation machine is very simple. It has four compartments where the assembly takes place. There are a wide variety of requirements in industries that are met by the usage of these machines.

The four compartments are the input, printing, slotting, and folding units respectively. In the initial phase, the sheets are put in the input unit in a proper orientation. The next job is that the designs get printed on sheets. As the requirements of the industries include using brand name and logo so this task is performed in the printing unit.

After printing, it goes into the slotting unit, in this unit proper orientation is maintained. Then it goes into the folding unit which is the last phase in the entire operation where the different sides get folded into a required shape. In finishing operation adequate pasting according to the need is done to improve the durability and reliability

The Oblique-type corrugation machine manufacturers should keep in mind the following specifications before proceeding in this arena.

1. Type of bearing: The bearings used in this type of machine are bearing and construction type, which technically functions smoothly.
2.Usage of heaters: To remove the moisture from the liner it is built with a preheater along with three regular heaters.
3.Capacity: It should be able to lift to 1ton reel.
4.Improved performance: To enhance the performance gum rollers are used
5.Lubrication: For proper lubrication, high-temperature grease is used
6.Usage of steels: Alloy steels are used in the manufacture of flute rollers.
7.Drive motor: The standard model used is the variable type of drive motor.

The features of the oblique type corrugation machine are as follows:
It is made of single facer type bearings which are mounted and the production design speed is comparatively higher. It is mounted on a reel stand which is self-loading hydraulic type. It also contains an AC motor with an inbuilt starter and a variable speed attachment with a frequency drive of AC type.

There is a proper arrangement of 3 regular heaters and one added preheater which is an added advantage to remove the moisture. A gearbox drive is fitted to control the variable speed. The gum rollers are mainly used to improve the overall performance and life.

Conclusion: The above-mentioned specifications and features are essential aspects to know for oblique-type corrugation machine manufacturers.

This entry was posted on July, 28, 2021 at 13 : 07 pm and is filed under Oblique Type Corrugation Machine. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required) (will not be published)